HIGHLIGHT ALL DEVICES
To highlight all devices at once, click the button All devices in the upper right corner and select Highlight
all devices. This highlights all online devices without errors that support this feature. To stop
highlighting, clich the button All devices again and select Stop highlighting all devices.
HIGHLIGHT ALL DEVICES IN A BRANCH/LOOP
In Diagnostics it is possible to visualize devices as branches and loops. For more information on how to do
this see "Visualize loops and branches"
Next to every loop or branch, you can find the button Highlight devices. Click this button to highlight all
devices in this loop/branch. In the loop/branch you can stop highlighting individual devices to see which
device is which in your setup.
Test Device
Using the Diagnostics application, you can test devices. In Test mode, you send a sinus test tone to the
device you want to test. The speakers of the device you are testing should then play this tone. You can also
test the microphone of the unit, the loudspeaker of the other units then play the audio captured by the
microphone of the tested device.
There are two options to test a device:
In the tile or list view: click the test icon to activate test mode
In the device overview, click the device to see the device details. On the bottom of the
window pane that appears in the right, click Test device.
In test mode, you disconnect from CoCon. Therefore a popup appears to confirm you want to go into test
mode. When you are in test mode, the browser displays an orange header indicating the system is in test
mode. In this header, there is also an option to disable the test mode. You can also disable the test mode
by clicking the test icon again.
DIAGNO STICS 152
To Next Page
Loading...
