COUPLE WITH CONFIDEA G3
With Plixus it is possible to combine wired units with wireless ones. You can add one or more Confidea G3
WCAPs to your Plixus network simply by connecting them to one of the conference ports. For more
information on the installation of the WCAPs in the Plixus network see "Install Confidea G3" on page92
We advise to first couple wireless units with the WCAPs in standalone mode and upgrade units
and WCAP to the latest version. When the devices need a new upgrade, you can simply uncouple
and update the units in standalone mode using the Confidea G3 web server.
Couple WCAP With Engine
1. Select Confidea G3 coupling in the main menu. This screen will show you all available
WCAPs.
2. Click Enable coupling to connect with the Plixus system. After coupling you are able to see
which frequencies the WCAPs are using together with their MAC address.
It is best to only enable or disable Confidea G3 coupling when no microphones are active, because
this can lead to audio distortion.
Figure 1-81 Couple Confidea G3 WCAP with Plixus
CO UPL E WITH CO NF IDEA G 3 15 8
To Next Page
Loading...
