VIDEO STREAM ROUTING
You can configure video stream routing using the CoCon Video application (CoCon & Plixus CRP version ≥
5.0).
Figure 1-17 Configure video stream routing in CoCon
In the application you can define the video input and create input groups ( shown on the left side of the
figure). In the middle you can see the six available video streams, you can change the name of each of
these streams. Disable streams by unchecking the option Available for delegates, these streams will not
be available for the V-SEL.
Assign a specific input to one or more streams, the downwards arrow indicates that the input is put on that
video stream. The output is shown on the right side, the arrow pointing to the right indicates that the video
stream is connected to the output.
See CoCon user guide for more information.
V IDEO STREAM ROUTING 41
To Next Page
Loading...
