Split And Combine Rooms
Use the WCAP in standalone mode for small meetings. For larger meetings you can combine multiple
rooms by coupling the WCAPs with the Plixus engine. In this way you can manage all units centrally using
the Plixus engine and web server.
When you need to split the room again, simply uncouple the WCAP from Plixus. The WCAP will go back to
standalone mode where it remembers all its previous settings.
The Plixus engine will remember the WCAPs once they were coupled. Just couple them using the web
server whenever you need to combine rooms.
WCAP 1 Standalone
WCAP 1 & 2 combined in Plixus
WCAP 2 Standalone
televic
REC
Figure 1-36 Use the WCAPs in standalone mode when you need to seperate rooms or combine to rooms into
one by coupling the WCAPs to the Plixus network.
Create Redundancy
Use multiple WCAPs to create redundancy. When one WCAP fails you can easily switch to associated units
to another empty WCAP using the web server. See "Couple with Confidea G3" on page158
CO MBINE PLIX US WITH CO NF IDEA G 3 70
To Next Page
Loading...
