Televic Plixus AE-R - Install Microphones; General Microphone Characteristics; Technical Microphone Characteristics

INSTALL MICROPHONES
General Microphone Characteristics
All Plixus compatible units have a screw-lock connector to insert pluggable microphones.
The recommended speaking distance from the mouth to the top of the microphone is between 20 to 40cm.
In order to accommodate the variety of speakers and speaking distances, microphones are available in
three different lengths: 30cm (D-MIC30SL), 40cm (D-MIC30SL) and 50cm (D-MIC50SL).
Technical Microphone Characteristics
Parameter Specifications
Material Brass
Color Matt black, RAL 9011
Transducer principle Back electret (condenser)
Operating principle Pressure gradient
Polar pattern Unidirectional
Nominal conditions
Bias resistor = 1k2
Vdd = 3.3 VDC
SPL = 1Pa
Max SPL @ 1 kHz 110dB SPL (1% THD+N)
Signal to noise ratio > 67dB(A)
Free field sensitivity 9.4 mV/Pa ± 3dB @ 1 kHz or
-40.5 dB, 0 dB = 1V/Pa @ 1 KHz
Power supply 3.3 VDC, 0.5mA
Consumption 0.5mA (without LED ring)
Max. 25mA (with LED ring)
Connection Screw lock
INSTAL L MICR O PHO NES 78