VOX
Voice activation (VoX) is a mode where the microphone button is not used. The microphone becomes
active when it detects sound above a certain threshold. You can configure Voice activation in the Group
discussion mode. The following settings can be configured:
Parameter Description
Threshold The system will monitor the ambient sound level and will activate the microphone when it is
above the configured threshold value.
Hold time Determines the number of seconds the microphone stays active after detection of the last sound
above threshold.
GROUP MODE
Group mode is a semi-automatic mode for standalone conferences where less protocol has to be followed
and no operator is available. Pressing the microphone button activates the microphone unless the
maximum amount of open microphones is reached. In this case the microphone will go into request mode.
When another microphone becomes inactive, the first unit in the request list will become active.
This mode has 3 activation types: toggle, push to talk and vox.
Mode Description
Toggle Press microphone button once to activate microphone.
Push to talk Keep microphone button pressed to activate microphone.
Voice
activation
Microphone becomes active when it detects sound above a defined threshold. For more
information see "VoX" .
OPERATOR
With the operator mode delegates cannot activate their own microphone. Only a command from CoCon,
the operator page or the API can activate these delegate microphones. Delegates can deactivate their
microphone by pressing the microphone button. Chairman can always activate microphones and use the
priority button if he wants to switch off the delegate microphones.
Microphone LED
Change the LED color of an active microphone or a microphone in request. By default the LEDof an active
microphone is red and for a microphone in request green.
DISCUSSION OPTIO NS 122
To Next Page
Loading...
