Telit Wireless Solutions FN990 Series - Page 68

FN990 Family Hardware Design Guide
1VV0301752 8
Page 68 of 83
2024-05-29
B43
0.5
0.5
0.5
B48
0.5
0.5
0.5
B66
6.0
5.5
5.5
B71
9.5
2.9
2.9
Table 54: Max Antenna Gain for FCC in dBi – NR bands
Max Gain for FCC (dBi)
NR
Max Gain to meet FCC
ERP/EIRP and MPE limit
Max Gain to consider
EN-DC Active
Max gain allowed
n2
8.5
5.9
5.9
n5
9.9
3.5
3.5
n7
8.5
3.8
3.8
n12
9.7
3.6
3.6
n13
10.2
3.9
3.9
n14
10.2
3.9
3.9
n25
8.5
5.9
5.9
n26
10.4
3.5
3.5
n30
1.0
1.0
1.0
n38
8.0
3.8
3.8
n41
5.5
3.8
3.8
n48
0.5
0.5
0.5
n66
5.5
5.5
5.5
n71
9.0
2.9
2.9
n77
2.5
2.5
2.5
n78
2.5
2.5
2.5
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Labelling requirements for the host device
The host device shall be properly labelled to identify the modules within the host device.
The certification label of the module shall be clearly visible at all times when installed in
the host device, otherwise, the host device must be labelled to display the FCC ID of the