2 INTRODUCTION
2.1 Scope
This document introduces the Telit FN990 Family module and presents possible and
recommended hardware solutions for the development of a product based on this
module. All the features and solutions described in this document apply to all FN990
Family variants listed in the applicability table.
This document cannot include every hardware solution or every product that can be
designed. Where the suggested hardware configurations are not to be considered
mandatory, the information provided should be used as a guide and starting point for the
proper development of the product with the Telit FN990 Family module.
2.2 Audience
This document is intended for Telit customers, especially system integrators, about to
implement their applications using the Telit FN990 Family module.
2.3 Contact Information, Support
For technical support and general questions, e-mail:
•
TS-EMEA@telit.com
•
TS-AMERICAS@telit.com
•
TS-APAC@telit.com
•
TS-SRD@telit.com
•
TS-ONEEDGE@telit.com
Alternatively, use: https://www.telit.com/contact-us
Product information and technical documents are accessible 24/7 on our website:
https://www.telit.com
2.4 Conventions
Note: Provide advice and suggestions that may be useful when integrating the
module.
Danger: This information MUST be followed, or catastrophic equipment failure or
personal injury may occur.
ESD Risk: Notifies the user to take proper grounding precautions before handling
the product.
Warning: Alerts the user on important steps about the module integration.
All dates are in ISO 8601 format, that is YYYY-MM-DD.
To Next Page
Loading...