Telit Wireless Solutions FN990 Series Hardware Design Guide

FN990 Family Hardware Design Guide
1VV0301752 8
Page 75 of 83
2024-05-29
12.4 EMEA Approvals
EU RED
EU Declaration of Conformity
In accordance with the above Approval Compliance Summary table, where applicable
(green ball), hereby, Telit Communications S.p.A declares that the equipment is in
compliance with the Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: https://www.telit.com/red
Text of 2014/53/EU Directive (RED) requirements can be found here:
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0053
RED Antennas
This radio transmitter has been approved under RED to operate with the antenna types
listed below with the maximum permissible gain indicated. The usage of a different
antenna in the final hosting device may need a new assessment of host conformity to RED.
Table 62: RED Antenna Type
Model
Antenna Type
FN990A28
Omnidirectional Monopole Antenna
FN990A40
Table 63: Max Antenna Gain for RED in dBi – WCDMA bands
Max Gain for RED (dBi)
UMTS
Ant Gain to meet CE
MPE limit
Max Gain to consider
same Frequency with
LTE
Max gain allowed
B1
11.84
8.7
8.7
B8
8.45
5.3
5.3
Table 64: Max Antenna Gain for RED in dBi – LTE bands
Max Gain for RED (dBi)
LTE
Ant Gain to meet CE
MPE limit
Max Gain to consider
EN-DC Active
Max gain allowed
B1
12.84
8.7
8.7
B3
12.33
9.2
9.2
B7
13.01
9.9
9.9
B8
9.45
5.3
5.3

Telit Wireless Solutions FN990 Series Specifications

General

Brand	Telit Wireless Solutions
Model	FN990 Series
Category	Computer Hardware
Language	English