Technical Maintenance
and Storage
Maintenance should be carried out at least twice a year and should include
the following steps:
Wipe the exterior surfaces of metal and plastic parts with a cotton cloth.
Do not use chemically active substances, solvents, etc. as these will
damage the paint.
Clean the electrical contacts of the rechargeable battery on the device
using a non-greasy organic solvent.
Check lenses of objective, eyepiece and rangefinder. If necessary,
remove dust and sand from the optics (it is preferable to use a non-
contact method). Cleaning of the exterior surfaces of the optics should
be done with cleaners designed especially for this purpose.
Store the device in a carrying case. Remove the Battery Pack for long-
term storage.
To Next Page
Loading...
