Telos XP50 - Wi-Fi Functionality

Wi-Fi Function
The device has a function enabling wireless communication with external
devices (smartphone or tablet) via Wi-Fi.
Turn on the wireless module in the WI-Fi Activation menu option.
Wi-Fi is displayed in the status bar as follows:
Indication on the status bar Connection Status
Wi-Fi is switched off
Wi-Fi connection is in progress
Wi-Fi is switched on, no
connection with device
Wi-Fi is switched on, device
connected
The device is recognized by an external device as TELOS_XXXX where
XXXX are the four last digits of the serial number.
After entering the password (default: 12345678) on a mobile device
(see Password Setupsubsection of theWi-Fi Settings section for
more information on setting a password) and setting up a connection,
the icon in the status bar will change to .
The Wi-Fi function will turn off automatically if there is not enough
battery power for Wi-Fi. The battery icon will turn red and flash. To
use the Wi-Fi function again, you need to charge the battery.