Firmware Update
1.
Download the free Stream Vision 2 App in Google Play orApp Store.
2.
Connect your Pulsar device to your mobile device (smartphone or
tablet).
3.
Launch Stream Vision 2 and go to section “Settings”.
4.
Select your Pulsar device and press “Check firmware update”.
5.
Wait for the update to download and install. Pulsar device will reboot
and will be ready to operate.
Important:
if your Pulsar device is connected to a phone or mobile device, please
turn on mobile data transfer (GPRS/3G/4G) to download update;
if your Pulsar device is not connected to your phone or mobile device
but is already listed in “Settings” > “My devices” section, you may use
Wi-Fi to download update.
Find answers to frequently asked questions about using Stream Vision 2
here.
Is your firmware up to date?
Click hereto check the latest firmware for your device.
To Next Page
Loading...
