EasyManua.ls Logo

Telpro Troll 1270 User Manual

Default Icon
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2019 Paragon Pro Mfg. All Rights Reserved.
Form 42-16-00-00 version 2
1
OPERATOR’S MANUAL
For Model 1270
Read and become familiar with this manual BEFORE operating unit.
WARNING
Before operating this equipment, thoroughly read this set of instructions, make sure
you understand them, and only then follow the step-by-step directions. Failure to do
so could result in serious property damage and / or serious bodily injury.
Made in Taiwan
www.paragonpromfg.com
Question and Answer IconNeed help?

Do you have a question about the Telpro Troll 1270 and is the answer not in the manual?

Telpro Troll 1270 Specifications

General IconGeneral
BrandTelpro
ModelTroll 1270
CategoryOutdoor Cart
LanguageEnglish

Summary

Safety and Operational Warnings

Pre-Operation Instructions

Thoroughly read and understand all instructions before operating the equipment to prevent misuse.

Equipment Integrity

Ensure all parts are present and undamaged; use only authorized replacement parts for safety.

Load Handling Guidelines

Observe load limits, operate on level surfaces, push not pull, and avoid electrical hazards.

Operator Responsibility

Always wear appropriate PPE and keep personnel aware of the cart's movement to prevent injury.

User Components and Specifications

Cart Components Identification

Identifies key components like support arms, cart frame, and casters for operational understanding.

Product Specifications

Details maximum panel size (48") and load rating (3,000 lbs), emphasizing 'DO NOT EXCEED'.

Care and Maintenance

Regular Inspection Schedule

Inspect casters, rollers, bearings, and latch pins frequently for proper operation and secure attachment.

Maintenance Procedures

Includes occasional oiling of caster bearings and taking care to avoid damaging the cart.

Assembly and Usage Instructions

Initial Caster Assembly

Fasten all casters securely to the cart frame using four bolts per caster for initial assembly.

Deploying Support Arms

Press release tab to remove upright arms from storage and lock them in position for loading.

Safe Cart Operation

Always push the loaded cart away from the operator; never pull it toward you for safety.

Transport and Storage

Lock arms for storage and transport; configure for flatbed use, ensuring convenient handling.

Parts Identification

Component Part Numbers

Lists part numbers for cart frame, support arm pull pin, support arm, and casters.

Component Descriptions

Provides descriptions for identified parts, including the cart frame and various caster types.