26
Using WLAN settings obtained from your DOT router, configure
the following WLAN Profile on your DOT IP phone:
o If you select WEP from the pull-down list “Security
Mode”:
Edit the profile name, SSID, WPA shared key in the
corresponding fields.
o If you select WPA PSK or WPA2 PSK from the pull-
down list “Security Mode”:
Select the desired Cipher type (TKIP, AES or TKIP+
AES) from the pull-down list of Encryption Type.
Edit the profile name, SSID, WPA shared key in the
corresponding fields.
Tap .
To Next Page
