3
SET UP
Before setting up your awning, it is a good idea to lay out a tarpaulin to protect the
awning from dirt and sharp objects.
Thread the awning into the caravan awning rail.
Ensure that all deflation points are closed before inflating the awning using the supplied
pump or optional electric pump.
Note: The ideal air pressure is 9psi. You can read the awnings current air pressure by
lightly pressing downwards on the pump.
When the awning is mostly inflated, you may need to push or pull the awning into it’s
standing position.
Peg the triangular pegging points at the base of the tube.
Peg the front two corner webbing straps, pulling taughtly against the rear two pegged
points.
Peg the guylines taught against the awning.
1
2
3
5
4
6
EN
To Next Page
Loading...