7
Before dismantling your awning, it is a good idea to lay out a tarpaulin to protect the
awning from dirt and sharp objects.
Remove any attached optional accessories.
Remove all pegs, excluding the front two pegging points that will be used to keep the
awning in place.
Unscrew the inflation point to deflate the awning.
Unpeg the remaining pegging points before disconnecting the awning from the vehicle.
Fold the front of the awning onto the awning roof.
If packing away with two people, this is best done by having each person hold the
opposing optional storm strap connection points, before lifting the awning into the air
and swinging onto the roof.
Fold the sides of the awning onto the awning roof.
Fold both sides of the awning halfway into itself before placing both halves together.
Check that the width of the awning will fit within the provided carry bag.
Roll the awning towards the deflation points to allow the air to escape.
Pack all parts of the awning into the carry bag.
The bag is oversized to make packing away more convenient.
The pack size can be further compressed by using the attached compression straps.
1
6
2
7
3
8
4
9
5
10
TAKE DOWN
EN
To Next Page
Loading...