Do you have a question about the Telular Phonecell SX5e GSM and is the answer not in the manual?
Essential precautions for safe installation and operation of the SX5 unit, including ventilation and environmental conditions.
Instructions for inserting the Subscriber Identity Module (SIM) card into the SX5 for operation.
Procedure for installing 4 "AA" alkaline batteries for backup power to the SX5 unit.
Details on how the unit operates on battery power and the limitations of battery life.
Guidance on selecting an optimal location for signal strength and initial physical installation.
Procedure for connecting the SX5 to an AC power source via the power supply and AC power cord.
Instructions for connecting a standard telephone to the SX5's telephone port.
Step-by-step guide on how to initiate a phone call using the SX5.
Instructions on how to answer an incoming call on the SX5.
Procedure for terminating an active phone call on the SX5.
Guidance on using a data cable to connect the SX5's DB-9 data port to a PC.
Instructions for setting up the SX5 for sending and receiving faxes via a PC.
Configuration for inbound fax port options and single/dual jack mode selection.
Connecting the SX5 to the trunk side of a PBX for enterprise operation.
Connecting the SX5 to the extension side of a PBX for enterprise operation.
Configuration for detecting PBX disconnect tones or analog disconnect pulses.
Configuring the SX5 to automatically route incoming GSM calls to a PBX extension.
Enabling two-stage dialing for accessing the GSM network from a PBX extension.
Troubleshooting steps for problems with making or receiving calls, including service and connection checks.
Information on radio frequency energy exposure and compliance with safety standards.
Mandatory requirements for safe operation, including mounting and proximity to the antenna.
Details on what the warranty covers, for how long, and Telular's obligations for repair or replacement.
Steps for installing and configuring a new modem device for the SX5 on a PC.