3G 11N Wireless Router
protocol message to pass. Select “802.1 x” from the
drop-down menu to enter the following window:
¾ WEP：Click “Enable/Disable” to enable or disable
the WEP algorithm.
¾ Radius Server Address：Enter the IP address of
the Radius server.
¾ Radius Server Port： Enter the authentication
port of the Radius server. The default is 1812.
¾ Shared Key ： Enter the shared key for
authentication server with 8~63 ASCII characters.
¾ Session Timeout ： The authentication interval
period between AP and authentication server. The
50
To Next Page
Loading...
