Tenda 4G180 - Specifications; Hardware Specifications Overview; Software Specifications

English
02
WPS
Buttons/
Port/Slot
1
2
Reset3
Description
SIM card slot
Power button.
• Hold it for about 3 seconds to turn on/off the
Hotspot.
• Press it once to turn on its LED indicators.
WPS button.
When the WPS function is enabled, the Wi-Fi
LED indicator will blink.
Hold the button down for about 3 seconds to
enable the WPS function. Enable the WPS
function on a WPS-supported device to establish
a WPS negotiation.
Reset button.
Hold the button using a sharp object for about 6
seconds to reset the Hotspot.
SD card slot4
5
Insert your SD card here to increase storage
space.
Insert your SIM card here.
Micro USB
input port
6
Used to charge the Hotspot, or to provide wired
device internet access using the USB cable.
No.
Buttons/Ports/Slots
2
1
3
5
4
6