Tenda 4G180 - Page 8

English
06
Charge your Hotspot
With no battery installed, 4G180 can still be powered on as long as it is connected to a
power supply device (such as a power adapter, laptop or portable charger) with the
USB cable.
If you need to use 4G180 with a power supply device always connected, you can
remove the battery for protection to extend its lifespan.
After the battery is fully charged, you can remove the charger to avoid shorter battery
lifespan caused by overcharge.
Tips
•
•
•
Method 1: Connect to a power socket (5V 1A).
Method 2: Connect to a computer by using the USB cable.
5V 1A