Tenda 4G680 - APN setting


15

5.3 APNsetting
WhenaSIMcardisinserted,theroutercanautomaticallydetecttheprofileinformation.When
youhaveobtainedAPNparametersorinneedofjoiningaspecificnetwork,youcanmanuallyadd
anewAPNprofileandconnecttoit.

Parameter Description
ProfileID ItspecifiestheIDofthenewprofilecreated.
Name Itspecifiesthenameoftheoperatorornetworkprovider.
APN Itspecifiestheconnectiontypeoftheroutertothenetwork.
User
Itspecifiestheusernameandpasswordusedforjoiningthenetwork.
Password
PDPType
Itspecifiesthetypesofcommunicationprotocol.AvailableoptionsareIPV4,IPV6and
IPV4/IPV6.IPV4/IPV6isrecommended.
Authentification
Preference
Itspecifiestheauthenticationprotocolsfornetworkconnection.Availableoptionsare
PAP,CHAPandPAP/CHAP.PAP/CHAPisrecommended.

ProceduresforaddinganewAPNprofile:
Step1 Startawebbrowseronthedeviceconnectedtotherouter,andvisit192.168.0.1.
Step2 ChooseWAN>APNSetting.
Step3 ChooseProfileList,clickthedropdownbox,andchooseAddNew.
Step4 Filltherequiredparameters,andclickSetConnect.
Step5 ClickApply.
‐‐‐End
 