Tenda 4G680 - DHCP


22

6.2 DHCP
6.2.1 DHCPserver
TheDHCPserverfunctionoftheroutercanautomaticallyassignIPaddresseswithinafixedrange
toclientsconnectedtotherouter.Toconfigurethisfunction,chooseDHCP>DHCPServer.

ProceduresforenablingDHCPsever:
Step1 Startawebbrowseronthedeviceconnectedtotherouter,andvisit192.168.0.1.
Step2 ChooseLAN>DHCP.
Step3 SetDHCPModetoSever.
Step4 SpecifytheStartIPaddressoftheIPaddresspool,whichdefinestherangeoftheIP
addressesthatcanbeassignedbythe DHCPservertoclients.
Step5 SpecifytheEndIPaddressoftheIPaddresspool.
Step6 SpecifytheLeaseTime.Thedefault value720minutesisrecommended.
Step7 ClickApply.
‐‐‐End

Parameter Description
DHCPServer
ItspecifieswhethertoenabletheDHCPserverfunction.Toenableit,setDHCPMode
toSever.Todisableit,setDHCPModetoNone.
 Server:TheDHCPserverisenabled.
 None:TheDHCPserverisdisabled.YouneedtomanuallyconfigureIPaddresses
andotherrelevantinformationtotheclientsconnectedtotherouterforinternet
access.
StartIP
ItspecifiesthefirstIPaddressthatcanbeassignedbytheDHCPservertoaclient.The
defaultvalueis192.168.0.20.
EndIP
ItspecifiesthelastIPaddressthatcanbeassignedbytheDHCPservertoaclient.The
defaultvalueis192.168.0.60.