Tenda 4G680 - Set date and time; Set system time


53

10.7 Setdateandtime
Therouterprovidesthesystemtimeanddaylightsavingtime(DST)fortimemanagement.
10.7.1 Setsystemtime
Toviewandsetsystemtimeoftherouter,youcanchooseSystem>DateandTime.
Synchronizingthesystemtimewithinternettimeservers
Ifyouwanttochangethesystemtimetomatchcertaintimezone,performthefollowingsteps.
Proceduresforsettingthesystemtime:
Step1 Startawebbrowseronthedeviceconnectedtotherouter,andvisit192.168.0.1.
Step2 ChooseSystem> DateandTime.
Step3 ChooseaTimeZoneinthedropdownbox. 
Step4 ClickApply.

‐‐‐End

Whenyouchoosetosynchronizethesystemtimewithinternettimeservers,therouterwill
automaticallyconductsynchronizationwhenitisconnectedtotheinterneteachtime.TimeSever
Addresscanalsobechanged.Thedefaultserversare1.my.pool. ntp.org,2.my.pool.ntp.organd
3.my.pool.ntp.org.
Manuallysyncwiththehost
Ifyouwanttosyncthesystemtimewiththeinternetinrealtime,youcanconductitmanually.
Proceduresforsyncingthesystemtimemanually:
Step1 Startawebbrowseronthedeviceconnectedtotherouter,andvisit192.168.0.1.
Step2 ChooseSystem> DateandTime.