Tenda AC1200 Quick Installation Guide

II Connect the modem router
If you don’t need phone service, directly use a phone cable to connect the phone jack to the DSL port of the
modem router, and then perform step 4 and 5. Otherwise, perform the following steps one by one.
1. Use a phone cable to connect the phone jack to the LINE port of the included DSL splitter.
2. Use a phone cable to connect your phone to the PHONE port of the DSL splitter.
3. Use a phone cable to connect the MODEM port of the DSL splitter to the DSL port of the modem router.
4. Use the included power adapter to connect the modem router to a power source, and press the ON/OFF
button. When the PWR LED indicator lights solid green, the system completes startup.
5. Connect user devices such as computers, smartphones or tablets to the modem router.
 Wired devices: Connect to port 1, 2, 3 or 4.
 Wireless devices: Connect to the WiFi network of the modem router. The default WiFi name (SSID) and
password (WLAN Key) are specified on the bottom label of the modem router.
Phone jack

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support