Specify Additional Settings
you can set WAN rate to 10M FDX or 10MHDX to enhance transmission rate.
LAN Parameters
Here you can change the LAN IP address, enable/disable DHCP server, or specify the LAN IP address
pool and the lease time.
Log in to the Router’s User Interface, and click Administration.
LAN IP & Subnet Mask
Here you can customize a LAN IP for your Router.
When you use the wireless repeating feature, you might need to change the LAN IP address in case
there is an IP conflict between the LAN IP of the Router and base station.
The Subnet Mask indicates the network number of the LAN IP address.
DHCP Server
DHCP server can automatically assign the broadband service information (IP Address, Subnet Mask,
To Next Page
Loading...
