4 Basic configuration
Startup
Tips
Use the included power adapter to power on the NVR. Abnormal power supply will cause the
NVR to not work properly, or even the NVR may be damaged.
Shutdown
Local management
Tips
Do not directly cut off the power supply of the NVR to force a shutdown; otherwise, the HDD
may be damaged, videos may be lost, or even the NVR may be damaged.
After the mouse and monitor are connected to the NVR, you can perform
the following settings on the NVR's GUI (exit the Full Screen interface):
Connect the included power adapter to the power port of the NVR, and
plug the power adapter into the power socket to start up the NVR.
Click in the upper right corner, click Shutdown , and then click OK.
When “The Device is Shut Down. Please Cut Off the Power” appears on
the screen, unplug the power adapter of the NVR.
After the mouse and monitor are connected to the NVR, you can perform
quick setup.
➊
Select the language displayed on the GUI and the time zone in which
the NVR locates, and then click ok.
Initial Setup
(UTC+8:00) Beijing, Chongqing, H
2022 - 01 - -14
11 濢 26 濢 51
Shutdown
Language
Time Zone
Date
Time
OK
To Next Page
Loading...
