EasyManua.ls Logo

Tenda K4P-4TR - Page 4

Tenda K4P-4TR
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appearance
NVR (The N6P-4H is taken as an example here.)
Solid blue: The NVR is initializing and
starting.
Solid green: The NVR is working
properly and is recording.
• Blinking green: The NVR is working
properly but is not recording.
Solid red: The NVR is working
abnormally. (The LAN port is
disconnected, IP address conflict
occurs, or the HDD is abnormal.)
POWER
LED indicator
Wall mounting hole
Wall-mounting materials are
self-prepared. Recommended
anchors and screws you may
use are as follows:
Plastic anchor: Outer diameter
6.0 mm, length 26.4 mm
Screw: PA3*14 mm (Head
diameter: 5.2 mm, head
thickness: 1.8 mm)
Hard disk drive
(HDD) screw hole

Other manuals for Tenda K4P-4TR

Related product manuals