Add the node to an existing network
I
English
06
Tips
•Please ensure that the node has never been used. If not, reset it first.
•Currently, the node can be networked with Tenda's Wi-Fi 6 routers that support the EasyMesh protocol.
Scenario2: Set up as an add-on nova node
1. Place the node in an elevated and open position within 3 meters from your existing nova.
2. Use the power adapter to connect the node to a power source. Its LED indicator should light solid
green. Wait about 40 seconds. The node completes startup when its LED indicator blinks green
slowly.
3. Press the MESH button of the node for about 1 to 3 seconds. The LED indicator blinks green fast.
Within 2 minutes, press the MESH button of the node of the existing network for 1 to 3 seconds to
negotiate with this node.
Original node Add-on node
To Next Page
Loading...
