Tenda N300 Wi-Fi xPON ONT - Page 87

Advance
79
Parameter description
Parameter
Description
DHCPv6 Mode
You can select a DHCPv6 server mode or disable it.
⚫
NONE: The DHCPv6 server of the ONT is disabled.
⚫
DHCPServer: The DHCPv6 server of the ONT is enabled.
DHCPv6 Server Type
It specifies whether the DHCPv6 Server is configured automatically or manually.
⚫
DHCPServer(Manual): You need to define the IP address pool, prefix length and
other required parameters for IPv6 addresses to be assigned to IPv6 hosts.
⚫
DHCPServer(Auto): The ONT defines the IPv6 addresses to be assigned to the IPv6
host automatically.
IP Pool Range
It specifies the IP address range within which the ONT can assign IPv6 addresses to
the IPv6 host.