TEG1216T/1224T Giga Web Smart Switch
¾ Click the “Yes” and log in the maintenance mode. The switch may
abnormally active after you log in the maintenance mode, it’s also
possible that the link becomes off, please wait for a moment if
meet this kind activity; Please reboot the switch or upgrade again
if without reply after a long time.
¾ The upgrading process will need about 1 minute, the switch will
reboot automatically after upgraded, you need to re-login.
¾ You can log in our website
www.tenda.cn, download the detailed
upgrading package and upgrading guide, please be careful to the
upgrading, advise you off all the other operations which without
relation to the upgrading, to avoid the PC end up suddenly or the
other unforeseen happen!
Notice: It’s PROHIBITED to power off during the upgrading. Otherwise
the switch will may can not be used normally any more aged.
3.9.4 IP Config
Configure IP Address: set the switch IP address, Subnet MASK,
gateway.
30
To Next Page
Loading...
