Tennant T5 - ec-H2 O Model Operation Adjustments; Emergency Shut-Off Button Function

MACHINE MAINTENANCE
To keep the machine in good working condition, it’s
important that the following maintenance procedures
are performed on a routine basis.
W ARNING: Electrical Hazard. Disconnect
Battery Cables Before Servicing Machine.
DAILY MAINTENANCE (After Every Use)
1. Drain the recovery tank (Figure 56).
FIG. 56
2. Rinse and clean out the recovery tank (Figure 57).
FIG. 57
3. Remove the recovery tank float shut--off screen
and clean (Figure 58).
FIG. 58
4. Remove the debris tray and empty (Figure 59)
FIG. 59
5. Drain the solution tank (Figure 60).
FIG. 60
6 Clean the solution tank filter (Figure 61).
FIG. 61
7. Rotate pad or replace when worn (Figure 62).
Disk Model
FIG. 62
T5 –Maintenance
(Page 6 of 15)
12 T5 9002333 REV.02 (07-06)
M