Tenvis IP602W User Manual (English)

To Next Page

MJPEG SERIES OUTDOOR

WiFi outdoor IP Camera

BEFORE YOU BEGIN

Please unpack the box carefully and identify that all the parts are present.

The Camera is suitable for indoor or outdoor use.

Check the voltage of the power supply. Make sure you use the recommended power

input (12V DC, 1.0A). Use of incorrect voltage is not covered by the warranty.

Do not attempt to open the casing to access the Camera. Damage caused to the

product by tampering with the casing is not covered by the warranty.

Do not aim the camera at the sun or similar intense light.

The interval time of powering the camera on and off must be more than 10 seconds

otherwise it will cause serious damage to the CPU.

When you update the cameras, please ensure you:

- connect the camera directly to a computer using a network cable

- close other programs and windows on the computer

- keep the power connected when updating the firmware

Need help?

Do you have a question about the Tenvis IP602W and is the answer not in the manual?

Tenvis IP602W Specifications

General