Need help?Do you have a question about the TeraBee IND-TOF-1 and is the answer not in the manual?
General| Brand | TeraBee |
|---|---|
| Model | IND-TOF-1 |
| Category | Accessories |
| Language | English |
Sensor capabilities, technology, enclosure, and features.
Detailed technical parameters of the sensor.
Explanation of symbols used in the document.
Details on the sensor's physical design and mounting options.
Description of the sensor's buttons and LED indicators.
Pin configuration of the M12 connector.
Electrical specifications and power requirements.
Summary of the sensor's six operating modes.
Description of the three phases involved in sensor setup.
Details on the default operating mode and its applications.
Description of Operating Mode 2 and its applications.
Description of Operating Mode 3 and its applications.
Description of Operating Mode 4 and its applications.
Description of Operating Mode 5 and its applications.
Description of Operating Mode 6 (Ranging mode) and its use.
Information on switching between operating modes and threshold transfer.
Summary of error cases and their corresponding LED signals.
Details and outcomes for special cases in modes 3 and 4.
Configuration parameters for the RS485 interface.
Description of read-only input registers for data retrieval.
How to configure the device's slave ID.
Setting the timeout duration for programming mode.
Setting the delay before entering operation mode after setup.
Defining trigger zones for NO/NC output in specific modes.
Parameter to select the sensor's operating mode.
Setting detection zone limits for Operating Mode 5.
Setting the duration of the NO/NC output signal.
Selecting the trigger zone for Special Case 2.
Configuring the switching output as NPN or PNP.
Configuring the switching output as NO or NC.
Parameter for setting the background distance.
Parameter for setting the first threshold distance.
Parameter for setting the second threshold distance.
Details on the sensor's projected reception area at different distances.
Explanation of the sensor's Field of View behavior.
Example of connecting the sensor to a PLC using PNP configuration.
Example of connecting the sensor to a PLC using NPN configuration.
To Next Page
