5. MALFUNCTIONS
If problems should occur with the use of the stove the cause can possibly be
found below. If not, then you are always welcome to contact your dealer.
The stove is difficult to control – it burns too fast
If the stove is new, then check that the directions have been followed.
If the stove is more than 1 year old or if it has been used heavily, then the
jointings may need to be changed. If the jointings sit for too long the heat
makes them lose their ability to keep the stove sealed.
Check that the ashpan is closed completely.
If there is heavy draught in the chimney it may be necessary to fit a damper in
it.
The stove has poor draught after installation
Check that the mounting instructions have been followed. It is especially the
conditions surrounding the chimney that may cause problems. Are diameter
and length okay, is it sealed, are smoke pipe and junctions sealed? Is the
To Next Page
Loading...
General