Need help?Do you have a question about the Termodinamik DEK SERIES and is the answer not in the manual?
General| Brand | Termodinamik |
|---|---|
| Model | DEK SERIES |
| Category | Boiler |
| Language | English |
Instructions for safe and efficient boiler operation, covering general usage rules and recommendations.
Details on the boiler's construction, insulation materials, and protective coatings against corrosion.
Explanation of the role of the expansion tank in managing water system pressure variations.
How the boiler's safety switch prevents damage from low water pressure.
Description of how water is heated via the plate heat exchanger for radiators and domestic use.
Highlights the boiler's quiet nature and integrated safety mechanisms like pressure switches.
Details on energy efficiency, programmable timer, and cost-effective heating solutions.
Information on easy operation with one-touch buttons and high output efficiency.
Notes on eco-friendliness due to electric fuel and corrosion protection for longevity.
Information about the boiler's external packaging, including protective film for transport.
Key parts like the 3-way valve block, pump body, cover, motor, and heat exchanger.
Components including water pressure switch, safety valve, relay box, and digital panel.
Parts like heating resistances, expansion tank, pipes, and external casing.
Main hydraulic blocks, pump parts, and heat exchanger for higher capacity models.
Digital panel, automatic safety valve, and pressure switch for different boiler capacities.
Heating resistances, expansion tanks, and internal/external bodies for larger models.
Guidelines for secure wall mounting and necessary clearances around the boiler.
Instructions for connecting pipes, ensuring no air pockets, and flushing the system.
Notes on electrical connections and warnings about high water temperatures causing scalds.
Specific distances to ceiling and wall fixing requirements for stable installation.
Diagram illustrating connection points for hot water, domestic water, and radiator circuits.
Physical measurements (height, width, depth) and required installation clearances from the ceiling.
Details on the thread sizes (e.g., 3/4", 1/2") for various water connections.
Diagram showing domestic hot water outlet/entry and radiator connections.
Recommendation to use a ball valve on the main water line for service access.
Ensuring proper grounding and connection of main power supply to the boiler.
Schematic for connecting internal components like heaters, sensors, and pump for specific models.
Details on power supply connections, transformer, and safety thermostat access.
Schematic for 12kW model wiring, including sensors, relays, and heater bands.
Connections for power supply, transformer, and safety thermostat for higher capacity models.
Schematic for 18-36kW models showing heater bands, sensors, and control connections.
Steps for filling the system with water using the filling valve.
Achieving correct pressure and removing air pockets during startup.
Caution regarding high water temperatures and scald prevention.
Connecting power cables and initial system startup procedures.
Explanation of leak current relay and high limit thermostats for safety.
Details on pressure control system and zero crossing circuit functions.
How heating resistances cycle for optimal performance and longevity.
Information on freeze protection and pump protection features.
How to use the child lock and reference to the technical data table.
Visual guide to the digital display and its various sections.
Descriptions of the START, STOP, ENTER, and ESC buttons on the control panel.
Using UP/DOWN buttons for menu traversal and value changes.
Operating buttons for clock setting, timer programming, and mode selection.
Interpreting information shown on the main display screen, including values and status.
Meaning of icons showing heating steps and operational status.
Procedure for setting the desired domestic hot water temperature.
Procedure for setting the desired radiator water temperature.
How to turn the boiler on/off and switch between winter and summer modes.
Steps for setting the clock and configuring basic timer functions.
Activating the button lock and understanding room thermostat interaction.
Accessing and navigating the timer programming menu.
Defining ON/OFF times and temperature setpoints for programmed schedules.
Procedure for configuring the boiler's shutdown times within the timer menu.
How to clear all programmed timer values from the system.
Using the economic timer settings for energy saving.
Understanding indicators for active timer programs and leaving timer mode.
Customizing device language, display, and power failure behavior.
Troubleshooting 'down prob' and domestic water sensor errors that turn off the boiler.
Understanding and resolving overheating conditions indicated by the system.
Interpreting error messages and notices related to system pressure.
Understanding alerts for timer settings and mode changes.
Details on what is covered and excluded by the product warranty.
Conditions for warranty validity, including installation and authorized servicing.
To Next Page
