PAGE
08
Of
08
Please note:
After having saved the KESTREL setting in the Bluetooth menu of your TERRAPIN X and in
case you have already established a connection before, the TERRAPIN X will, upon power
up, re-establish the connection. This is indicated by a blinking BT symbol which turns steady
once connection is established.
Please also note:
It may take up to 15 sec until a connection between the KESTREL with LiNK and your
TERRAPIN X is established. During this period measurements might not be successfully
transferred to .
Connecting your TERRAPIN X to a KESTREL with LiNK
To Next Page