8 AXON AX 100 mkII Update (English)
11. You have mastered the first part well. But that's no reason to get overconfident—
please ensure that you are well-grounded for the following steps as well. Carefully re-
move the AXON Soundboard from its antistatic packaging. Take care not to touch the
components or printed circuits; always handle the board by the edges. The alignment
of the board is correct when the contact strip is located at the top edge and the socket
for the contact pins at the lower left.
12. Next, place the board with the socket on the mating double row of contact pins. Be
sure that the pins and sockets are aligned before pressing the board home.
To Next Page
Loading...
