To Next PageTo Next Page
Need help?Do you have a question about the Terratek PSMS10L and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Type | Miter Saw |
| Voltage | 230V |
| Power | 1500W |
| No Load Speed | 5000 RPM |
| Blade Diameter | 210 mm |
Details on voltage, rated power, and no load speed of the saw.
Specifications for blade size and various cutting capacities.
Provides the net and gross weight of the saw.
Ensuring a clean, well-lit work area and keeping children away.
Proper use of power outlets and extension cords for electrical safety.
Advisories on personal condition, guards, eye protection, and attire.
Instructions on maintaining tools, proper adjustment, and avoiding misuse.
Guidance on professional servicing and periodic maintenance schedules.
Key safety rules including guards, keys, work area, alertness, and environment.
Recommendations for clothing, footwear, and handling the tool safely.
Detailed safety rules on glasses, securing work, overreaching, and maintenance.
Preventing accidental starts, checking for damaged parts, and using correct accessories.
Instructions for grounding tools and connecting to electrical power sources.
Explanation of three-prong plugs and compatible outlets for safe connection.
Information on two-prong plugs and outlets for double insulated tools.
Guidelines for selecting and using appropriate extension cords.
Explanation of symbols used on the tool and in the manual.
Rules for blade handling, workpiece securing, kickback, and cutting nails.
Precautions regarding kickback, blade flanges, workpiece positioning, and chips.
Warnings and precautions concerning the laser guide system.
Instructions for unpacking the saw and verifying all included accessories.
Steps for assembling the clamp and attaching the dust bag.
Instructions for installing supports and operating the power switch.
How to turn the laser beam on/off and its positioning relative to the blade.
Notes on safe transport, initial power-up checks, and calibration.
Procedure to re-align the table to a 90-degree angle with the blade.
Steps to adjust the fence for accurate alignment with the table and blade.
How to set the blade depth for trench cuts.
Description and uses for compound miter cuts.
Procedure for performing basic crosscuts.
Continued procedure for basic cross cuts, including clamp usage.
Step-by-step guide for performing slide cuts.
Instructions for performing angle or bevel cuts.
Dangers and procedures for safely replacing the saw blade.
Detailed steps for removing and installing a new saw blade.
Routine cleaning, dust removal, lubrication, and tool body cleaning.
Procedure for checking, removing, and replacing carbon brushes.
Details of the product's two-year warranty coverage and limitations.
