Only use qualified repair agents to service this power tool.
Only use qualified electrician to repair any damaged wiring.
NEVER remove the grounding prong from the power toll or extension cord.
Power Extension Cords
When using any extension cord the machine will suffer a power reduction due to the drop in voltage
ca
used by the length of the cord. This can be partially offset by selecting extension cords with lower
gauge wire.
Ch
eck all extension cords for damage before use.
Avoid sharp objects.
Do not position the cord where it could be subject to traffic passing over it.
Symbols
IMPORTANT: Some of the following symbols may be used on your tool.
V…………………………volts
A…………………………amperes
Hz……
………………….hertz
~…………………….….alternating current
…/m……………….....revolutions per minute
回 .....................class II construction (double insulated)
Kg
………………………..kilograms
n0
………………………..No load speed
CE
………………….……Conforms to European Harmonised New Approach Directives
DC ………………..…….Direct Current
Unpacking
Carefully remove the product and any accessories from the box. Make sure that all items listed in the
packing list are included.
Packing List
A) Drill
B)
Battery
C)
Charger
Battery use and care
A battery operated tool with integral batteries or a separate battery pack must be recharged
only with the specified charger for the battery.
A charger that may be suitable for one type of battery may create a risk of fire when used with another
battery.
Use battery operated tool only with specifically designed battery pack.
Use of any other batteries may create a risk of fire.
NEVER place hands or other body parts near the drill bit or chuck during operation.
Hold the drill by its handle only. Because the cordless driver drill operates by battery power, be aware of
the fact that it can begin to operate at any time.
To Next Page
Loading...
