Need help?Do you have a question about the Teseq NSG 437 and is the answer not in the manual?
Covers high voltage hazards, operator qualifications, and essential safety warnings.
Details safety aspects for EMI, network exchange, maintenance, and operating environment.
Outlines the initial power-on procedure and self-test sequence for the simulator.
Step-by-step guide for connecting the pistol and powering on the NSG 437.
Explains how to navigate menus and manage settings via the touch-panel interface.
Describes numerical value entry and selection functions on the display.
Details how to access the submenu for adjusting the discharge voltage.
Explains how to choose between positive, negative, or alternating polarity.
Describes using the counter for test sequences and setting test counts.
Details the four supported modes for triggering discharges (e.g., single, repetitive).
Explains how to select single pulses or set repetition rates for discharges.
Confirms the NSG 437's compliance with standards and the need for test engineer diligence.
Lists discharge tips, measurement accuracy, operating modes, weight, and ambient conditions.
To Next Page
General