Subsystem specifications
10-8 Technical specifications
Front suspension
Rear suspension
Type Roadster Independent. Upper and lower unequal length wishbones.
Co-axial coil spring/telescopic damper. Sway bar.
Roadster Sport Adjustable damping. Adjustable anti-roll bar.
Alignment optimum 0.1 mm toe-in
tolerance 0.5 mm toe-out to 0.7 mm toe-in overall.
Maximum side to side 0.3 mm.
Camber optimum - 0.1°
tolerance + 0.1° to - 0.3°. Maximum side to side 0.2°.
Castor optimum + 3.8°
tolerance + 3.5° to 4.1°. Maximum cross castor 0.35°.
Type Roadster Independent. Upper and lower unequal length wishbones.
Co-axial coil spring/telescopic damper. Sway bar.
Roadster Sport Adjustable damping. Adjustable anti-roll bar.
Alignment optimum 3.0 mm toe-in
tolerance 2.4 mm toe-in, to 3.6 mm toe-in.
Maximum side to side 0.3 mm.
Camber optimum - 1.8°
tolerance - 1.6° to - 2.0°. Maximum side to side 0.2°.
To Next Page
Loading...
