Interior temperature control
7-5Comfort and convenience
Air conditioning
To cool the air inside the vehicle, turn the
fan on, then press the air conditioning
button 4. The button illuminates to
indicate the system is operating.
Rotate the temperature control to achieve
the desired air temperature. To turn off,
press the air conditioning button again.
Air recirculation
Press the air recirculation button 5 to
recirculate the air inside the vehicle. The
button will illuminate to indicate that air is
being recirculated. Press again to switch
off.
When air recirculation is operating, and
the roof is installed, 90% of the air inside
the vehicle is recirculated, instead of being
drawn from outside the vehicle. You can
use this to prevent fumes from entering
the vehicle or to more effectively maintain
a constant temperature inside the vehicle.
Note: It is recommended that you switch
off air recirculation for a short period each
hour to refresh the air inside the vehicle,
and to help prevent window misting.
Ventilation
Air is drawn into the ventilation system
through the grill at the front of the vehicle.
Keep the grill clear of obstructions (leaves,
snow, etc.).
Press the thumb depression to open the
vents. Rotate to direct air as required. The
vents on each side of the dashboard can
be adjusted to direct air onto the side
windows.
Note: When you open the face level vents,
airflow to the foot and windshield vents is
reduced.
Windshield defrosting
For maximum efficiency when removing
frost or mist from your windshield, set the
controls as follows:
• Rotate the air distribution control to
windshield.
• Rotate the fan control fully clockwise.
• Switch on the air conditioning.
• Rotate the heating control for
maximum heat.
When the windshield has fully cleared,
adjust the controls as required.
TR0026
To Next Page
Loading...
