Installation Considerations
Wall Connector may be installed on any flat, vertical surface capable of supporting its weight (e.g. wall,
pedestal, etc.). Wall Connector (wirebox and faceplate) weighs ~10 lb (4.5 kg).
Choosing Location
Install Wall Connector in a location that allows the charging cable to reach the vehicle charge port
without putting strain on the cable.
• Dark gray: Recommended installation area for Wall Connectors with 18 ft (5.5 m) cable
• Light gray: Recommended installation area for Wall Connectors with 8.5 ft (2.6 m) cable
Install Wall Connector in a location with ample clearance on all sides to allow the charging cable to loop
around the unit and the charging handle to comfortably land in the side dock.
NOTE: If constrained by space, a cable organizer can be installed near the Wall Connector (sold
separately).
INSTALLATION
13Gen 3 Wall Connector Manual
To Next Page
Loading...
