NOTE: To cancel the parking maneuver before exiting
the vehicle, touch Cancel on the popup screen.
NOTE: If you do not choose a direction of travel on the
touchscreen, Summon does not start a parking
maneuver when you exit.
Stopping or Canceling Summon
Stop Model 3 at any time while Summon is active by
using the mobile app or by pressing any button on the
key fob
accessory. Summon also cancels when:
• A door handle is engaged or a door is opened.
•
You interact with the steering wheel, brake pedal,
accelerator pedal, or shift.
• Model 3 detects an obstacle.
•
Summon has moved Model 3 the maximum distance
of approximately
39 feet (12 meters).
• Your phone enters sleep mode or loses connectivity
to Model 3.
Limitations
Summon is unlikely to operate as intended in the
following types of situations:
•
The driving path is sloped. Summon is designed to
operate on flat roads only (up to 10% grade).
•
A raised concrete edge is detected. Summon does
not move
Model 3 over an edge that is higher than
approximately 1 in (2.5 cm).
•
One or more of the ultrasonic sensors (if equipped)
or cameras is damaged, dirty, or obstructed (such as
by mud, ice, or snow, or by a vehicle bra, excessive
paint, or adhesive products such as wraps, stickers,
rubber coating, etc.).
•
Weather conditions (heavy rain, snow, fog, or
extremely hot or cold temperatures) are interfering
with sensor operation.
•
The sensors (if equipped) are aected by other
electrical equipment or devices that generate
ultrasonic waves.
NOTE: Summon is disabled if Model 3 is in Valet mode
(see Valet Mode on page 43).
WARNING:
The list above does not represent an
exhaustive list of situations that may interfere with
proper operation of Summon. It is the driver's
responsibility to remain in control of Model 3 at all
times. Pay close attention whenever Summon is
actively moving Model 3 and stay prepared to take
immediate action. Failure to do so can result in
serious property damage, injury or death.
Summon
106 MODEL 3 Owner's Manual
To Next Page
Loading...
