22
Model X Emergency Response Guide
Always use appropriate tools, such as a hydraulic cutter, and always wear
appropriate PPE when cutting Model X. Failure to follow these instructions can result
in serious injury or death.
WARNING
Regardless of the disabling procedure you use, ALWAYS ASSUME THAT
ALL HIGH VOLTAGE COMPONENTS ARE ENERGIZED! Cutting, crushing, or touching
high voltage components can result in serious injury or death.
WARNING
No-Cut Zones
Model X has areas that are defined as “no-cut zones” due to the presence of high voltage, gas
struts, SRS components, or other hazards. Never cut or crush in these areas. Doing so could
result in serious injury or death. The “no-cut zones” are shown in pink.
Windows
The windshield, Falcon wing door top glass, and rear liftgate glass are made of laminated safety
glass. The front side windows can be either tempered or laminated glass.
1. Laminated safety glass
2. Tempered or laminated safety glass
3. Tempered safety glass
To Next Page
Loading...
