Safety &
Security
• Parking Brake: You can manually apply and release the parking brake
(see Parking Brake on page 77).
• Power O: Touch to manually power o the vehicle (see Powering O
on page 60).
• Speed Limit Mode: Specify if and how much you want to limit
acceleration and max speed (see Speed Limit Mode on page 133).
• Sentry Mode: When on, Sentry Mode uses the vehicle’s cameras and
sensors to monitor its surroundings while the vehicle is locked and in
Park. If a threat is detected, Sentry Mode triggers the Alert or Alarm
state, depending on the severity of the threat. You can customize
Sentry Mode to automatically enable except in places such as Home,
Work, or your Favorites (see Sentry Mode on page 154).
• Passenger Front Airbag: Manually control the front passenger airbag
(applicable only in regions where the airbag can be disabled, as
described in Airbags on page 48).
Note: If applicable, the passenger front airbag can also be controlled
by touching the airbag's status icon located in the top corner of the
touchscreen.
• Park Assist Chimes: If on, you will hear an audible beep when
approaching an object while parking (see Park Assist on page 80).
• Joe Mode: When enabled, Joe Mode lowers the volume of your
vehicle's chimes, except for turn signals.
• Security Alarm: Enable the security alarm (see Security Settings on
page 154).
• Passive Entry: If on, doors automatically unlock whenever you
approach Model X carrying a key. If o, you must use the key to unlock
Model X. See Using the Key on page 6.
Note: You must press the brake pedal to power Model X on before you
can change the Passive Entry setting. See Starting on page 60.
Note: If Passive Entry is o and you do not press the brake pedal to
start Model X within approximately five minutes, a message displays on
the instrument panel and you must use the key to lock, then unlock
Model X again before starting the vehicle.
Note: When you enable passive entry, it is recommended that you also
enable PIN to Drive to increase security (see PIN to Drive on page 154).
• Tilt/Intrusion: (if available) Enable a siren that sounds if Model X
detects motion inside the cabin or if the vehicle is moved or tilted (see
Security Settings on page 154).
• PIN to Drive: Increase security by preventing Model X from being
driven until a 4-digit PIN (Personal Identification Number) is entered
(see PIN to Drive on page 154).
• Cabin Overheat Protection: Reduce the temperature of the cabin in
extremely hot ambient conditions for a period of up to twelve hours
after you exit Model X (see Cabin Overheat Protection on page 138).
• Allow Mobile Access: Allow Tesla's mobile applications to access your
Model X (see Mobile App on page 162).
Note: To disable Allow Mobile Access, enter your Tesla account
credentials on the touchscreen.
• DATA SHARING: Allow sharing of road measurement data (see Data
Sharing on page 211).
Controls
Using the Touchscreen 131
To Next Page
Loading...
