4. Drag the slider to the On position.
5. Enter the 4-digit PIN that you want to use to enable
and disable Speed Limit Mode.
NOTE: If you forget the PIN, you can disable Speed
Limit Mode by entering login credentials for your
Tesla account.
NOTE: While Speed Limit Mode is enabled, the
acceleration setting (Controls > Pedals & Steering >
Acceleration) automatically sets to Chill.
WARNING: Driving downhill can increase driving
speed and cause Model Y to exceed your chosen
maximum speed.
WARNING: Speed Limit Mode is not a replacement
for good judgment, driver training, and the need to
closely monitor speed limits and driving
conditions. Accidents occur at any speed.
Sentry Mode: When enabled, cameras and sensors
remain powered on and ready to record suspicious
activity whenever
Model Y is locked and in Park. See
(Using Sentry Mode on page 154).
View Live Camera via Mobile App (if equipped): Enable
to see a live video feed of your vehicle’s surroundings
from the mobile app (see
Using Sentry Mode on page
154).
Dashcam (if equipped): When enabled, cameras can
record and save video footage of the surrounding
roadway (see Using Dashcam on page 154). Customize
Dashcam by selecting:
•
Auto: Dashcam automatically saves a recording to
the USB flash drive (if available and installed) in
situations where Model Y detects a safety event, such
as a collision or airbag deployment.
•
Manual: You must touch the Dashcam icon to save a
recording of the most recent 10 minutes of driving to
the USB flash drive.
•
O: Dashcam is disabled until you select Auto or
Manual.
•
On Honk: When you press the horn, Dashcam saves a
recording of the most recent 10 minutes of driving to
the USB flash drive.
Delete Dashcam Clips: Deletes all Dashcam and Sentry
Mode footage, including recent and saved clips.
Format USB Drive (if equipped): If a USB flash drive is
inserted into a front USB port, touch to format the
flash
drive to allow Model Y to save video recordings using
Dashcam, Sentry Mode , if equipped (see USB Drive
Requirements for Recording Videos on page 22).
Park Assist Chimes: If on, a beep sounds when Model Y
approaches an object while parking (see Park Assist on
page 68).
Joe Mode
: If on, Joe Mode lowers the volume of your
vehicle's chimes, except for turn signals.
NOTE: Joe Mode may not be available at delivery.
Security Alarm (if equipped): Enable the security alarm
(see Security Settings on page 153).
Tilt/Intrusion: If your vehicle is equipped with the
security package, a battery-backed siren sounds in
situations where
Model Y detects motion inside the
cabin, or is moved or tilted (for example, with a tow
truck or jack). See Tilt/Intrusion (if equipped) on page
153.
PIN to Drive: Increase security by preventing Model Y
from being driven until a 4-digit PIN (Personal
Identification Number) is entered (see PIN to Drive on
page 153).
Glovebox PIN: For additional security, protect glovebox
contents using a 4-digit PIN (see
Glovebox PIN on page
153).
Cabin Overheat Protection: Reduce the temperature of
the cabin in extremely hot ambient conditions for a
period of up to twelve hours after you exit Model Y (see
Cabin Overheat Protection on page 134). Cabin
Overheat Protection stops operating after 12 hours, or
when the energy remaining in the Battery drops to 20%,
whichever occurs
first.
Service
Owner's Manual: View the onscreen Owner's Manual. A
new version of the onscreen owner's manual is typically
provided with every software update and therefore
contains more recent information that those provided by
Tesla elsewhere (for example, via the web).
Car Wash Mode: Enable before using a car wash to
ensure all doors and windows are closed, and all chimes
are turned o. See Car Wash Mode on page 182.
Adjust Headlights: Make adjustments to the level of the
headlights . See Headlight Adjustments on page 57.
CAUTION:
Headlights should only be adjusted by
Tesla Service.
Towing: Prepare Model Y to be transported by keeping it
in Neutral (with the parking brake disengaged), when
you exit. See Instructions for Transporters on page 208.
Notifications: Display a list of notifications that have
recently appeared on your vehicle.
Camera Calibration (if equipped): Clear the existing
calibration of Autopilot cameras to reset the stored
camera positions and angles. Once calibration is cleared,
you must drive to calibrate the cameras. See Drive to
Calibrate Cameras on page 87 for more information.
Controls
129Using the Touchscreen
To Next Page
Loading...
