Head Supports
The front seats include integrated head supports that
you can not adjust.
The second row outboard seats include an adjustable
head support that you can raise, lower, or remove. When
either of these seats is occupied by a passenger that is
not in a child safety seat, the corresponding head
support should be adjusted (align the center of the head
support with the center of the occupant's head) and
locked into position. To raise a head support on a
second row outboard seat, pull it upward to the desired
position. To lower it, press and hold the button on the
base of the outer post while pushing it downward.
The second row center seat, and both third row seats (if
equipped), are equipped with the option to raise a head
support. Initially stowed into the seat's back rest, you
can access the head support by pulling it upward.
WARNING:
When installing a child safety seat in a
second row seating position, or in the third row (if
equipped), you must lower the head support. The
headrest must be raised and locked in place when
sitting in the rear middle seat.
To stow the head support in the second row center seat,
press and hold the button on the base of the post while
pushing the head support fully downward.
To lower a head support in the third row, press and hold
the button on the base of the post while pushing the
head support fully downward.
WARNING:
To minimize the risk of severe injury or
death in the event of a collision, ensure that head
supports are positioned correctly before driving.
Removing/Installing a Head Support
All head supports in the second and third row (if
equipped) seating positions can be removed. To remove
a head support:
1.
Fully raise the head support by pulling it upward.
2.
Press and hold the button located at the base of one
of the posts.
3. Insert a short, flat object (such as a small flat-head
screwdriver) into the opening in the base of the
opposite post and pull the head support upward.
Front and Rear Seats
28 MODEL Y Owner's Manual
To Next Page
Loading...
