GETTING STARTED 12
shows the peak part of the signal as a two digit number from 0 to 95. Iron
reads as 0 and copper and silver coins read 95. All other targets will read
somewhere in-between. Take some time to try all your targets and notice
the different readings that you get.
The best distance from the coil is somewhere between 4 and 8 inch-
es. If you get closer, you will notice the display will show a series of
arrows pointing upwards or the words "LIFT COIL." Either one of these
display readings indicates that there is too much signal for the micro-
processor to handle properly. When the arrows are showing, the display
will show as much information as it possibly can. Once the overload is
too great, the display will show "LIFT COIL." Moving the target away
from the coil will result in a more accurate reading. When using the
DeLeón in the field, lifting the coil will accomplish the same result.
To Next Page
Loading...
