Need help?Do you have a question about the Test-Um Lil' Buttie Ranger and is the answer not in the manual?
Details the Ranger's physical and electrical specifications, including interfaces, dialing, memory, and impedance.
Defines voltage and current measurement capabilities and provides a safety warning for electric-power lines.
Lists the physical controls on the Ranger, such as slide switches, push buttons, keypad, and LCD.
Describes the LCD panel, including its size and character type for displaying information.
Details the types of connectors used for telephone network and headset connections.
Explains the power source (9-VDC battery) and lists current consumption in different modes.
Provides estimates for battery life based on usage and battery capacity.
Specifies the maximum operating altitude for the test set.
Introduces the Ranger as a portable telephone test set for installers and technicians, highlighting its features and included accessories.
Details the Ranger's compact size, ergonomic design, LCD display capabilities, Caller ID, DigitView, amplified loudspeaker, and headset support.
Explains how to connect the Ranger to a phone line using the RJ-12 modular jack and cable set.
Details how to connect the included headset for hands-free operation, noting the disabling of the handset microphone/earpiece.
Provides step-by-step instructions for replacing the 9-volt battery, including a caution about memory loss.
Explains the function of the slide switch and its three settings: TALK, BELL, and MONITOR modes.
Details the Ranger's LCD panel, its 2-line display, and the meaning of various icons and indicators.
Describes how to use the microphone mute button for different functions like TapLock and Insta-Talk.
Explains how to control the loudspeaker volume and operation using the speaker button.
Details how the Function (FCN) button modifies the operation of other keys on the keypad.
Introduces the Ranger's command keys and their multi-functions depending on the operating mode.
Explains how to enter and use the scrolling-recall mode to review stored phone numbers.
Guides the user on how to enter and navigate the setup mode for configuration options.
Covers advanced features like Traffixguard, Automatic Power-Off, Caller ID, and DigitView.
Provides instructions on how to clean the Ranger and check its cable set for wear or damage.
Outlines the warranty terms and conditions for the Ranger test set and cordset.
Provides instructions on contacting Test-Um Technical Support and what information to prepare.
Details the procedure for returning units for warranty repair or replacement.
Explains the process and costs associated with non-warranty repairs.
Gives guidelines on how to properly ship the Ranger for service, including required documentation.
Lists and describes various cord sets available for the Ranger, including their part numbers and features.
Describes the available headset options, including mini and deluxe models with their specifications.
Details the available Modtest adapters, their types, and connectivity features.
Lists carrying accessories like belt clips, assemblies, and pouches for the test set.
To Next Page
General